LicensingJuly 7, 2026 *updated October 19, 2026· 15 min read

FAA A&P License: Requirements and How to Get One

What 14 CFR Part 65 actually requires, the three routes that satisfy the experience rule, and the order in which you sit the General, Airframe and Powerplant tests. Every number below is cited to the regulation or to the FAA page it comes from.

A&P licensing: quick answers

What is the difference between the Airframe and Powerplant ratings?

The FAA mechanic certificate under 14 CFR Part 65 can carry two ratings. The Airframe rating covers aircraft structures and airframe systems: sheet metal and composite structures, hydraulic and pneumatic systems, landing gear, flight controls, fuel systems, cabin atmosphere, and fire protection. The Powerplant rating covers engines and related systems: reciprocating and turbine engines, propellers, fuel metering, ignition, lubrication, and engine electrical systems. General is not a rating — it is a knowledge test every candidate must pass. Most mechanics hold both ratings (A&P).

How long does it take to get an FAA A&P certificate?

It depends on the route. The experience route is fixed by regulation: 18 months of practical experience for a single rating, or 30 months performing airframe and powerplant duties concurrently for both (14 CFR 65.77(b)). The school route has no fixed length in Part 147 — schools publish their own, and the two programmes we checked on 19 October 2026 list 16 months (PIA diploma) and 20 months (Spartan diploma). On top of the training, all prescribed tests must be passed within a 24-month period (65.71(a)(3)).

What exams do I need to pass for an FAA A&P certificate?

You must pass three computer-based FAA knowledge tests: General (60 questions, 2 hours), Airframe (100 questions, 2 hours), and Powerplant (100 questions, 2 hours). The pass mark is 70% on each. After passing the required knowledge tests, you must also pass an oral and practical (O&P) exam administered by a Designated Mechanic Examiner (DME).

Can I get an A&P certificate without going to school?

Yes. You can qualify entirely through documented practical experience: 30 months for both Airframe and Powerplant ratings, or 18 months for either rating alone (14 CFR 65.77). Many mechanics earn their A&P this way while working at repair stations, FBOs, or flight schools. The Part 147 school route simply folds that experience into an accelerated, structured program.

What is the salary range for A&P mechanics in the United States?

The U.S. Bureau of Labor Statistics reports a median annual wage of $79,870 for aircraft mechanics and service technicians (May 2025) and $82,280 for avionics technicians (May 2025). Actual pay depends on employer, region, shift and ratings; the FAA does not publish pay data by rating, so any figure broken down by Airframe versus Powerplant is an estimate, not a statistic.

SL

Sky License Team

A&P exam preparation specialists — helping mechanics earn their FAA certificate since 2025

Introduction to FAA A&P Certification in the United States

The FAA mechanic certificate — commonly known as the A&P (Airframe & Powerplant) — is the cornerstone of aviation maintenance in the United States. Issued by the Federal Aviation Administration under 14 CFR Part 65, the certificate authorizes qualified professionals to perform maintenance, preventive maintenance, and alterations, and to approve aircraft for return to service. Without certificated mechanics, no aircraft in the United States can legally operate after maintenance.

The FAA issues a single mechanic certificate with up to two ratings: Airframe (A) and Powerplant (P). There is also a General knowledge test that every candidate must pass — it covers the fundamental knowledge common to all maintenance work, but it is not a separate rating. Most mechanics pursue both ratings, earning the A&P designation that employers across the industry recognize.

The A&P certificate is respected globally as a mark of technical excellence in aviation maintenance. American A&P mechanics are in high demand not only domestically but also internationally, thanks to bilateral aviation safety agreements that recognize FAA credentials in many countries around the world.

FAA A&P License Requirements (14 CFR 65.71)

Part 65 subpart D sets four conditions for a mechanic certificate and its ratings. They are short, and everything else in the process hangs off them.

ConditionWhat §65.71 saysWhat it means in practice
AgeAt least 18 years old — §65.71(a)(1)No parent signature, no minimum hours before your 18th birthday
EnglishAble to read, write, speak and understand English — §65.71(a)(2)The certificate can be endorsed “Valid only outside the United States” for certain applicants employed abroad by a US air carrier
Test windowAll prescribed tests passed within a 24-month period — §65.71(a)(3)The clock covers the written tests and the oral and practical, together
Applicable sectionsComply with the sections of subpart D that apply to the rating sought — §65.71(a)(4)Airframe only, Powerplant only, or both: each rating pulls in the experience and test rules for that rating

That is the whole eligibility list. Subpart D contains no education requirement, no diploma requirement and no medical certificate; the FAA’s own “Become an Aviation Mechanic” page states the same two personal gates — 18 years old and English — and then moves straight to the experience routes below. Admissions standards that schools add on top (a high school diploma, a maths placement test) are the school’s policy, not the FAA’s.

Spelling: “A&P licence” and “A&P license” are the same FAA certificate — the regulation and the FAA use license. There is no separate British or Canadian A&P: Transport Canada issues an Aircraft Maintenance Engineer (AME) licence instead, under its own rules.

The Three Routes to the Experience Requirement (14 CFR 65.77)

§65.77 is the section that decides how long the process takes, because it is the only part of the regulation where the clock is different for different people. You must present either a Part 147 document or documentary evidence of practical experience. There is no third option in the text — the military route works because the FAA accepts the JSAMTCC course as satisfying it.

RouteWhat you presentTime
Part 147 schoolAn authenticated document from a certificated AMTS recording your graduation date and curriculum — §147.21, accepted by §65.77(a)Set by the school, not the FAA: 16 months for PIA’s diploma and 20 for Spartan’s, as published on 19 October 2026
Practical experienceDocumentary evidence of experience with the procedures, practices, materials, tools and equipment used in constructing, maintaining or altering airframes or powerplants18 months for the rating sought — §65.77(b)(1); 30 months if airframe and powerplant duties were performed concurrently — §65.77(b)(2)
Military (JSAMTCC)Completion of the Joint Service Aviation Maintenance Technician Certification Council course for military personnelSet by the course

Two details that catch people out. First, the 18 months is tied to the rating: §65.77(b)(1) asks for experience “appropriate to the rating sought”, so the work you document has to match the rating you apply for. The 30-month figure in §65.77(b)(2) is for applicants who performed the duties appropriate to both ratings concurrently. Second, whichever route you take, the FAA still requires you to pass the same tests — General first, then Airframe and/or Powerplant, then the oral and practical (§65.75, §65.79). A school replaces the months, never the exams.

Certificate Ratings: General, Airframe, and Powerplant Explained

Choosing your path through the three knowledge tests is the single most important planning decision you will make on your A&P journey. Each rating leads to a different area of expertise with distinct responsibilities, work environments, and earning potential. Below is a detailed breakdown.

General — The Foundation for Every Mechanic

The General knowledge test (ACS subject area AM.I) is required of every mechanic candidate, regardless of rating. It covers the fundamentals every technician must master:

  • Basic electricity — circuits, components, and electrical measurement
  • Aircraft drawings — blueprints, schematics, and symbols
  • Weight & balance — weighing aircraft and computing CG limits
  • Materials and processes — metals, composites, heat treatment, and corrosion control
  • Physics and mathematics — the applied science behind maintenance tasks
  • FAA regulations — 14 CFR Parts 43, 65, and 91, maintenance records, and FAA Form 337
  • Ground operation and servicing — towing, jacking, fueling, and safety practices

Airframe Rating

The Airframe rating (ACS subject area AM.II) covers the maintenance, repair, and alteration of aircraft structures and airframe systems. Airframe-rated mechanics are specialists in:

  • Metallic and non-metallic (composite) structural repair
  • Hydraulic and pneumatic power systems
  • Landing gear systems — retraction, brakes, tires, and steering
  • Flight control systems — primary and secondary
  • Aircraft fuel systems and fuel storage
  • Cabin atmosphere, pressurization, and environmental control systems
  • Fire protection and detection systems
  • Aircraft electrical systems and wiring

Airframe mechanics typically work in line and base maintenance at airlines, MROs, flight schools, and general aviation shops. The field is evolving rapidly with next-generation aircraft like the Boeing 787, which is over 50% composite by weight, and fly-by-wire aircraft like the Airbus A350.

Powerplant Rating

The Powerplant rating (ACS subject area AM.III) covers the maintenance, repair, and testing of aircraft engines and their related systems. Powerplant-rated mechanics are experts in:

  • Reciprocating engines — theory, overhaul, and troubleshooting
  • Turbine engines — theory, inspection, and hot-section maintenance
  • Propellers and propeller governing systems
  • Fuel metering systems — carburetors, fuel injection, and FADEC
  • Ignition and starting systems
  • Lubrication, cooling, and exhaust systems
  • Engine electrical systems and instruments

Powerplant mechanics are in high demand across airlines, MROs, and engine overhaul facilities. With the global fleet of jet and turboprop aircraft continuing to grow, skilled engine technicians are among the most sought-after professionals in aviation maintenance.

Comparison Table: General, Airframe, and Powerplant

FeatureGeneralAirframePowerplant
Primary FocusFundamentals common to all maintenanceStructures & airframe systemsEngines & related systems
Experience requiredNot applicable — General is a test, not a rating18 months appropriate to the rating, or a Part 147 completion document (§65.77)18 months appropriate to the rating, or a Part 147 completion document (§65.77)
Written Exam60 questions / 2 hours / 70%100 questions / 2 hours / 70%100 questions / 2 hours / 70%
Typical WorkplaceFoundation for all maintenance rolesAirlines, MROs, flight schools, GA shopsAirlines, MROs, engine overhaul facilities
Key SkillsElectricity, drawings, weight & balance, materials, regulationsStructures, hydraulics, landing gear, flight controls, fuelReciprocating & turbine engines, propellers, fuel metering, ignition

On pay: the table carries no salary row on purpose. The U.S. Bureau of Labor Statistics reports a median annual wage of $79,870 for aircraft mechanics and service technicians and $82,280 for avionics technicians (May 2025), and the FAA publishes no pay data by rating. Any figure split by Airframe versus Powerplant is an estimate, not a statistic.

FAA Knowledge Test Details (14 CFR Part 65)

The three FAA knowledge tests are the written component of mechanic certification, governed by 14 CFR Part 65 and defined in the Aviation Mechanic Airman Certification Standards (FAA-S-ACS-1). The ACS is the official document that defines the learning objectives, exam content, and competency standards for aviation maintenance training and certification in the United States.

Key facts about the knowledge tests:

  • Format: Computer-based multiple-choice tests delivered at FAA-approved testing centers operated by the FAA testing service (PSI)
  • Pass mark: 70% on each test — General (42 of 60), Airframe (70 of 100), Powerplant (70 of 100)
  • Time limit: 2 hours per test, with a computer testing supplement (figures and reference data) provided on-screen
  • Content areas: General (AM.I), Airframe (AM.II), and Powerplant (AM.III) per the ACS
  • Reference materials: 14 CFR Parts 43, 65, and 91, AC 43.13-1B, the FAA AMT Handbooks (FAA-H-8083-30/31/32), FAA Form 337, and Airworthiness Directives

Which test comes first, and the 24-month clock

The order is not a study preference — it is a rule. The FAA requires you to take the General knowledge test first, then the Airframe and/or Powerplant knowledge test for each rating you are adding, and only then the oral and practical test.

  1. General written test — 60 questions, 2 hours, 70% to pass. Required before either rating test, whatever your experience route.
  2. Airframe and/or Powerplant written test — 100 questions each, 2 hours each, 70% to pass. You must pass each section before you may apply for the oral and practical (§65.75(b)).
  3. Oral and practical test — administered by a Designated Mechanic Examiner against the ACS knowledge, risk-management and skill elements (§65.79).
  • 24-month window: all of the prescribed tests must be passed within a 24-month period (§65.71(a)(3)) — the written tests and the O&P sit inside the same clock.
  • Part 147 students can start earlier: if the school certifies that you completed the general portion of its curriculum, you may take the General written test before you meet the experience requirement (§65.75(c), §147.31), and you may take the oral and practical during your final subjects (§65.80).
  • Expired written report: the relief in §61.40 — for US military and civilian personnel assigned outside the United States in support of US Armed Forces operations — allows an expired written test report to be used to take the practical test under Part 65 (§65.75(d)). Outside that relief, an expired report means retaking the test.
  • Certificates and examiners: a DME accepts the application and conducts the test, and may issue a temporary mechanic certificate at the discretion of the local Flight Standards office (14 CFR §183.25(a)(2)).

For detailed test-by-test breakdowns, practice questions, and study strategies, visit our A&P resource hub and exam FAQ.

Step-by-Step Pathway to Your A&P Certificate

Step 1: Confirm Eligibility and Choose Your Route

Check the four §65.71 conditions in the table above — 18 years old, English, tests within 24 months, and the sections that apply to the rating you want — then pick one of the three routes to §65.77. The route is the only thing that changes the length of the process: a Part 147 completion document, 18 or 30 months of documented experience, or the JSAMTCC military course.

If you choose the school route, our guide to FAA Part 147 A&P training schools covers what the regulation requires of a school, published programme lengths, and the questions worth asking before you enrol.

Step 2: Complete Training or Accumulate Experience

Enrol in your chosen program or begin documenting your experience. Key experience areas you must develop competency in include:

  • Inspection and testing of aircraft components and systems
  • Repair and modification per approved data (manufacturer manuals, Service Bulletins, STCs)
  • Troubleshooting and systematic fault diagnosis
  • Record-keeping, maintenance log entries, and FAA Form 337 documentation (14 CFR Part 43)
  • Use of specialized tools, test equipment, and ground support equipment
  • Safety practices, hazardous material handling, and environmental compliance

Step 3: Pass the Written Tests

Take the General test first, then the Airframe and/or Powerplant test for each rating. Each test must be passed with a minimum score of 70%, and each written section must be passed before you may apply for the oral and practical (§65.75(a)–(b)). Use Sky License's AI-powered practice platform to generate adaptive practice questions, simulate timed exams, and track your progress across every ACS subject area.

Study one test at a time and in the order the FAA requires. The General test covers the subject areas every mechanic is expected to know; the rating tests go deep into structures and systems (Airframe) or engines and propellers (Powerplant).

Step 4: Document Your Experience and Apply

Document your hands-on maintenance experience meticulously. Each entry should include the date, aircraft type, task description, reference to approved data, and the signature of a supervising certificated mechanic. That record is what supports your application when the FAA or your examiner reviews it.

Step 5: Pass the Oral and Practical (O&P) Exam

The final regulatory hurdle is the oral and practical test, administered by a Designated Mechanic Examiner (DME) against the knowledge, risk-management and skill elements of the ACS (§65.79). The examiner will evaluate your depth of understanding and your hands-on skills using projects drawn from the Aviation Mechanic ACS. Prepare by reviewing the ACS thoroughly, practising mock oral interviews with experienced mechanics, and sharpening your hands-on skills on the specific projects listed for your rating.

Step 6: Submit Your Application

Once the knowledge tests and the O&P exam are passed, the application goes to the FAA on FAA Form 8610-2, Airman Certificate and/or Rating Application — Mechanic and Parachute Rigger. A DME accepts the application and conducts the test, and may issue a temporary mechanic certificate at the discretion of the local Flight Standards office (14 CFR §183.25(a)(2)) — it is not automatic. Your package must include:

  • FAA Form 8610-2, completed and endorsed
  • Your authenticated Part 147 completion document (§147.21), or the documented experience that satisfies §65.77
  • Your knowledge test reports for General plus the rating test(s)
  • Identification

Note on forms: FAA Form 8610-1 is the Mechanic’s Application for Inspection Authorization, not an experience record — you will meet it later only if you pursue an IA under §65.91. Your experience evidence travels with the 8610-2 package.

The certificate does not expire, but your privileges depend on recent experience: §65.83 makes the certificate ineffective unless, within the preceding 24 months, the Administrator has found you able to do the work or you have spent at least six months exercising the privileges. Congratulations — you are now authorized to perform maintenance and approve aircraft for return to service in the United States.

Career Outlook and Salary Expectations

The demand for certificated A&P mechanics is projected to grow. The U.S. Bureau of Labor Statistics projects employment of aircraft and avionics equipment mechanics and technicians to grow 6% from 2025 to 2035 — faster than the average for all occupations — with about 13,100 openings each year over the decade, many of them from replacement needs as workers retire or leave the labour force.

On pay:

  • Aircraft mechanics and service technicians: median annual wage of $79,870 (BLS, May 2025)
  • Avionics technicians: median annual wage of $82,280 (BLS, May 2025)
  • By rating, by employer, by shift: no official breakdown exists — the FAA publishes no pay data by rating, and BLS publishes by occupation, not by Airframe versus Powerplant. Treat any table that splits pay by rating as an estimate.

Many employers also offer shift premiums, overtime pay, travel allowances, pension plans, and comprehensive benefits. The profession also offers excellent mobility — American A&P mechanics work around the world, from Australia to the Middle East to Europe, thanks to bilateral agreements that recognize FAA credentials.

External Resources

For official information directly from the FAA, consult these authoritative resources:

Frequently Asked Questions

Can I hold both the Airframe and Powerplant ratings?

Yes — and most mechanics do. The A&P designation simply means you hold both ratings on a single mechanic certificate. Each rating requires passing its own knowledge test (plus General) and completing the corresponding O&P projects. Holding both makes you more versatile and valuable to employers.

How long are the knowledge test results valid?

All the prescribed tests must be passed within a 24-month period (§65.71(a)(3)), so the written report you earn today has to be followed by the oral and practical inside that window. If the report expires, you retake the written test — the only relief is the one described in §61.40 for US military and civilian personnel assigned outside the United States (§65.75(d)).

Is there a difference between A&P, AMT, and A&P mechanic?

In the United States, the FAA uses the term Aviation Maintenance Technician (AMT) as the official job classification, while the certificate itself is the mechanic certificate with Airframe and Powerplant ratings — hence "A&P." The terms are used interchangeably in the industry. AMT is also used generically in other countries, where the equivalent credential may be called an Aircraft Maintenance Engineer (AME).

What happens if I fail an exam?

You can retake a failed knowledge test. The Airman Knowledge Test Report you receive lists the subject areas you missed, which is the most useful study list you will get — work from it rather than restarting the whole test. Check the testing provider’s current retesting and fee rules when you book the retake; the FAA does not prescribe a study period.

Do I need a college degree to become an A&P mechanic?

No. There is no degree requirement for the FAA mechanic certificate. The Part 147 school route is the most structured and efficient path and folds the experience requirement into the program, but you can qualify entirely through 30 months of documented on-the-job experience (or 18 months for a single rating).

How Sky License Prepares You for Success

Sky License is the only AI-powered study platform built specifically for the FAA A&P knowledge tests. Unlike generic flashcard apps or outdated question banks, our platform intelligently adapts to your learning needs:

  • Full ACS coverage — Every AM.I, AM.II, and AM.III subject area mapped to practice questions and detailed explanations
  • Adaptive difficulty engine — The AI identifies your weak areas and adjusts question difficulty in real time
  • Timed exam simulations — Replicate the real FAA testing environment (60 and 100 questions, 2 hours) to build speed and confidence
  • AI Tutor — Get instant, plain-language explanations of complex regulatory and technical topics
  • Comprehensive analytics — Track your progress across every subject area and learning objective

Start your A&P journey with Sky License today →

Ready to train for your FAA A&P exam?

Exam-style questions, timed simulations and the theory for your General, Airframe and Powerplant ratings — pick your plan and start today. The FREE plan costs nothing.

Get Started

Create a free account

Share this guide

Free Download

The FAA A&P Licensing Roadmap — free PDF

Not sure where to start? Get the step-by-step path to your Airframe & Powerplant certificate: the two training routes, FAA Form 8610-1 experience documentation, the three written tests, and the oral & practical exam — with a typical timeline for each route.

No spam. Unsubscribe anytime. You'll also get exam tips and study resources for when you reach the written-test stage.